전원공급 및 신호조정기 비교표

Mounting Hardware Comparision Table

 

제품 모델을 선택하시면 세부 정보를 볼 수 있습니다.

오렌지색 별표 ()는 일반적으로 많이 사용되는 모델을 표시합니다.
Gurranteed In Stock 표시는 즉시 출고 가능함을 의미하며, 한국에서 1주일이내 공급 가능합니다.

외 형 모 델 설 명
CC701 In-line charge converter, constant current powered, 1 mV/pC
  • Low noise PiezoFET™ amplifier
  • Converts charge mode transducers to voltage mode
  • Works with industry standard two-wire system Power Supplies
  • Input overload protection
  • Output immune to cable motion noise
  • 1 mV/pC
CC701A In-line charge converter, constant current powered, 10 mV/pC
CC701HT In-line charge converter, constant current powered, 4 mV/pC, compatible with High Temperature Accelerometer Model 376
  • Low noise PiezoFET™ amplifier
  • Converts charge mode transducers to voltage mode
  • Works with industry standard two-wire system Power Supplies
  • Input overload protection
  • Output immune to cable motion noise
  • 4 mV/pC
  CC726E In-line charge converter, constant current powered, 4 mV/pC, Intrinsically Safe Certified: FM, compatible with 376E
  • Low noise PiezoFET™ amplifier
  • Converts charge mode transducers to voltage mode
  • Works with industry standard two-wire system Power Supplies
  • Input overload protection
  • Output immune to cable motion noise
  • 1 mV/pC
HHM-101 'Sensor Doctor', Hand held diagnostic tool, internal constant current sensor power, BOV meter
  • Oscillation circuit to test connections and sensor health
  • BOV measuring, linear from ground to supply
  • LED displays Sensor Indication: Normal, Short, Open
  • LED displays: Low Battery warning
  • Toggle switch to provide power to the accelerometer
  • Affordable price
P31 Power unit/amplifer, ultra low noise, for 731A seismic accelerometer, battery powered gain of 1, 10, 100, selectable velocity conversion, internal constant current sensor power
  • Powers Model 731A Seismic Accelerometer
  • Ultra low noise
  • Selectable amplifier gain of 1, 10, 100
  • Switchable output: acceleration or velocity
  • Wide dynamic range >120 dB
  • Switchable low pass filter 450 Hz or 100 Hz
  • Long battery life; Uses readily available 9VDC transistor batteries
  • Battery test light
  • Portable and lightweight
P702B Power unit/amplifier, general purpose, battery powered gain of 1, 10, 100, selectable velocity conversion, internal constant current sensor power
  • Powers single IEPE accelerometers and AC couples the output
  • Selectable amplifier gain of 1, 10, 100
  • Acceleration or velocity output
  • LED overload/fault alarm
  • Internal filtering
  • Can be used with Model CC701 for charge converter
P703B Three channel power unit, battery powered, constant current source, AC coupled output
  • Powers single IEPE accelerometers and AC couples the output
  • Portable and lightweight
  • Battery powered (LA704B Line Adapter optional)
  • LED battery test condition light
  • Uses readily available 9 VDC transistor batteries
  • Can be used with Model CC701 for charge converter
  • Low cost
  • NC3 NiCad Battery Kit available factory or field installed
P703BT Three channel power unit, battery powered, constant current source, AC coupled output, for use with triaxial sensors
  • Powers 993 Series triaxial accelerometers & AC couples the output
  • Three separate BNC receptacle output (x, y, z)
  • Portable and lightweight
  • Battery powered (LA704B Line Adapter optional)
  • LED battery test condition light
  • Uses readily available 9 VDC transistor batteries
  • Can be used with Model CC701 for charge mode transducers
  • Low cost
P704B One channel power unit, battery powered, constant current source, AC coupled output
  • Powers single IEPE accelerometers and AC couples the output
  • Portable and lightweight
  • Battery powered (LA704B Line Adapter optional)
  • LED battery test condition light
  • Uses readily available 9 VDC transistor batteries
  • Can be used with Model CC701 for charge converter
  • Low cost
  • NC3 NiCad Battery Kit available factory or field installed
  PR710A & PR710B Ten channel power unit/amplifier, gain of 1,10, or 100, selectable filtering or velocity conversion, 19
  • 10 channels
  • Powers 700 Series accelerometers
  • Low noise amplifier for each channel
  • Selectable gain of X1, X10 or X100
  • Replaceable channel modules
  • Continuous fault monitoring of each channel
  • Optional low or high pass filtering
  • Standard 19?rack mountable
  • Selectable filtering: no filter, 2-pole Butterworth & velocity conversion
  NC3 NiCad battery kit, (3 rechargeable NiCad batteries & LA704 charger) recommended option for P703B and P704B power units

NiCad Battery Kit, includes three rechargeable NiCad batteries and one Model LA704 Line Adapter/ Charger. This system is recommended as an option for Models P702B, P703B, P703BT and P704B Power Supplies, when applications require extended use.

  • LA704B Line Adaptor
  • Jumper
  • 3 NiCad Batteries
  • Instructions
LA704B Line adapter, 120 VAC for P703B and P704B power units
  • Line Adapter for Models P702, P703B, P703BT, and P704B Power Supplies
  • Supplies line voltage to battery power unit and charges the NC3 NiCAD batteries when they are installed
LA704B-220 Line adapter, 220 VAC for P703B and P704B power units
  • Line Adapter for Models P702, P703B, P703BT, and P704B Power Supplies
  • Supplies line voltage to battery power unit and charges the NC3 NiCAD batteries when they are installed

 

TRAC Mark INCOSYS